Wholesale Products Direct from our mill

Wholesale Products Direct from our mill

Wholesale Exotic Hardwood Decking

Manufacturing deckingmanufacturing wholesale decking feeding the planer sandermanufacturing wholesale decking feeding the moulderTigerwood wholesale decking lumber
We mill wholesale exotic hardwood decking in a variety of species such as Ipe, Cumaru, Tigerwood (Muiracatiara), Jatoba, Itauba, Garapa, and many other South American species. We manufacture decking for several different markets such as North America, Europe, Australia, and several other regions. We mill a variety profiles such as smooth, S4S (surfaced 4 sides) E4E (eased 4 edges), Anti-slip, and custom profiles. The standard radius for most decking is 3mm, but we also produce 5mm radius edges and other sizes upon request. Our Ipe decking is available as AD (air-dried) or KD (kiln dried). The other species we mill are typically produced kiln dried. Most commonly we kiln dry decking to 12-14% MC, but we can also kiln dry our exterior decking to your required moisture content. Like all of our wood products we can provide our decking FSC certified or non-FSC.

Advantage Deck Tiles

Our TilesSome Competitors Tiles
20×20 Z Back 3pc z back keeps tile square2pc Back Can rack out of square
24” x 24” has 3pc straight back that keeps tile square24” x 24” can have 2 pc back that can rack out of square
Tiles are squareTiles are not square
Stainless Steel ScrewsNon-Stainless Screws
Kiln dried for maximum stabilityWet or Air dried, causing wood to shrink
Good quality milling on German machinesPoor milling with chatter, grain tearout and end snipe
Neatly applied end waxMessy applied end wax, showing on surface
Corner holes drilled for DeckWise connectorsNot always drilled for connectors
Good consistent colorPoor color variation
No Sap Wood on surfaceSapwood
Tile is all the same speciesBack of tile can be made from a cheaper specie than the top surface
Screws properly installedImproper screw installation, causing splits
Consistent gap spacingVariation in gap spaces
Optional pedestal mounting slotOften not an option for pedestal mounting
Responsibly harvested from managed forest and available FSC certifiedLegality of wood source questionable

Live Edge Slabs

Rough Sawn - Advantage LumberRough Sawn - Advantage LumberRough Sawn - Advantage LumberRough Sawn - Advantage Lumber

We produce live edge table slabs in a variety of species, thicknesses, lengths, and widths. From our Brazil factory, we ship mostly 2” (50mm), 2 ½” (64mm), and 3” (75mm) thick rough slabs. We also cut thicker slabs upon request. Our big slabs can range up to 67” (170 cm) wide. These are great for making large conference room tables, kitchen tables, desks, coffee tables, and other furniture. We can provide them AD (air dried) or KD (kiln dried) in species such as Jatoba (Brazilian Cherry), Tigerwood, Cumaru, Ipe, Angelim Pedra, Tatajuba, and many other South American hardwood species. We also produce smaller sizes with strange shapes and figures for special furniture projects. Our sawmill in Florida also produces Live Edge Slabs in a variety of wood species indigenous to India, South America, North America, Australia, Africa and Asia. These include Indian Rosewood, Camphor, Eucalyptus, Live Oak, and many other species. This gives you the opportunity to purchase a large assortment of properly kiln dried slabs in various species, shapes, colors, grain patterns, and figure at the best possible prices. The slabs shipped from our Florida sawmill are also available kiln dried, surfaced, and sanded to final thickness.
In the Brazil MillIn the Florida Mill
ItaubaAustralian Beefwood
Angelim – PedraBottlebrush
Angelim – VerelhoCamphor
IPE AD & KDChinaberry
GarapaCuban Mahogany
BloodWoodFlorida Cedar
QuarubaFlorida Cypress
CambaraJava Plum
LaceWoodLaurel Oak
Live Oak
Longleaf Pine
Monkey Pod
Norfolk Island Pine
Silk Oak
Flame tree

Live edge slabs in Florida kilns

Advantage Florida Kiln Drying

Live edge slabs in vacuum kilns

Advantage Lumber Vacuum Kiln

Live edge slabs in Brazil kiln

Kiln Drying in the Brazil Kiln

Wholesale Rough Sawn Lumber

Rough Sawn - Advantage Lumber
Our rough sawn lumber is available in both FSC and non-FSC as well as GMS (random width and length) or fixed width (sorted for width and rough cut to width). All of our lumber is bandsawn for a more consistent production thickness than traditionally Circular Sawn lumber. We can provide AD (air dried), PAD (Partially Air Dried), or KD (kiln dried) lumber. Upon request, we can sort for a figure such as quartersawn, plain sawn, curly, bird’s’ eye, etc. We can kiln dry to the typical 6-8% Moisture Content for North American interior use, 10-12% MC for European interior use, or other levels as needed for your region or project. We can cut to standard lumber thickness of 4/4 (1” or 25mm), 5/4 (1 ¼” or 32mm), 6/4 (1 ½” or 38mm), 8/4 (2” or 50mm), or thicker as required. The widths of many of our species can run very wide. If you have special requirements please let us know.

Wholesale Exotic Hardwood Flooring

We produce hardwood flooring in a variety of tropical hardwood species such as Cumaru, Tigerwood, Ipe, Jatoba, Andiroba, and many others. Our most common dimension flooring is ¾” (19mm) thick x 5” (127mm) face, but we also mill a variety of other thicknesses and widths. Typically we mill the flooring 1’ to 7’ length, with a 3’ average. We also mill custom long length flooring upon request. We ship only unfinished flooring from our Brazil factory, but we can also produce prefinished flooring in our US facility in small or large volumes.
Wholesale Products Direct from our mill was last modified: by