Garapa Hardwood Lumber Products – FSC Certified is available

Garapa Hardwood Lumber Products

Other common names for Garapa include Brazilian Oak, Brazilian Ash, Cobre, and Garrote. The wood is medium density for a tropical hardwood and mills nicely. Garapa is golden yellow in appearance and is available from our facilities as both FSC and Non-FSC certifications.

Our Garapa is kiln-dried (KD) and available as decking, flooring, dimensional lumber, E4E, S4S, RS (Rough Sawn), deck tiles, and table slabs.

It is also typically used for

  • Exterior joinery
  • Hydraulic works (seawater)
  • Ship building (ribs)
  • Cooperage
  • Turned goods
  • Furniture or furniture components
  • Wood frame house
  • Flooring
  • Industrial or heavy flooring Interior joinery
  • Ship building
  • Interior Stairs
  • Vehicle or container flooring
  • Cabinetwork (high class furniture)
  • Tool handles (resilient woods)
  • Formwork
  • Boxes and crates
  • Wood-ware

Cambara – Hardwood Lumber Products

Cambara hardwood lumber products

Cambara –(Qualea spp)

Often Cambara is referred to as Mandioqueira and the tree grows anywhere from 30-50m occasionally reaching heights up to 60 plus meters. Widths on larger trees can be as wide as more than 100cm. It is a very long cylindrical stem clear of branches for the first 20-30 meters. This means exceptionally good use of wood from a single tree. Cambara is similar to Quaruba in grain texture except it is more course. The color is close to that of Jatoba but a lighter color of red. The heartwood is strictly demarcated from the sapwood which is yellowish or grayish white. It can be sanded to a natural luster and takes finishes well. It glues correctly and machines without too much difficulty as long as the grain is not exceptionally wavy. We supply Mandioqueira in both E4E and S4S as well as rough lumber. We can also mill it into custom profiles if specified. Cambara is great for flooring, joinery, furniture and millwork if someone is desiring a wood that is different than what is normally offered.

Common Name:

Brazilian Mahogany, Cambara, Mandioqueira, Florecillo, Quaruba Rana

Botanical Name:

Qualea spp

Indigenous to:

Throughout tropical America from southern Mexico to Peru, but most abundantly in the Guianas and Brazil.

Modulus of Rupture:

20,000 lbf/in2

Shrinkage:

Tangential – 8.4% Radial – 4.4% Volumetric – 11.4% T/R Ratio – 1.9

How is it dried:

Kiln Dried (KD)

Is it dried quickly:

Yes, but needs to be controlled as it will dry too fast unevenly if allowed to air dry in a non-controlled environment.

Stability:

Cambara remains stable after the drying process but should not be left in the elements without some cover as it is rated as poor stability

Exterior Wood Recommendation:

It can be used if only the heartwood is present. Sub species are commonly mixed together as there is no apparent differences to the naked eye. Some are more resistant to decay than others so it is best used as an interior wood. class 2 – inside or under cover (dampness possible)

Fastening Method:

Should be predrilled for screws

Ecosystem impact:

This tree is not threatened by any over-logging and is not listed on any CITES Appendices to be regulated for over logging.

Toxicity and allergic reactions:

Rare to none

Odor:

No distinct smell

Products we manufacture using this species:

Info coming soon

Other common uses:

Exterior joineryExterior panelling

Interior joinery

Interior panelling

Formwork

Glued laminate

Boxes and crates

Veneer for interior of plywood

Veneer for back or face of plywood

Blockboard

Light carpentry

Wood frame house

Moulding

Furniture or furniture components

Sliced veneer Bridges (parts not in contact with water or ground)

Wood-ware

Susceptibility to

Dry Wood borers:

durable – sapwood demarcated (risk limited to sapwood)

Fungi:

class 3 – moderately durable

Termites:

class S – susceptible

Treatability:

class 2 – moderately permeable

Janka Hardness:

  • 1730 lbf (7,696 N)

Bloodwood hardwood lumber products

BloodWood

Bloodwood –(Brosimum rubescens)

In Brazil this wood is often referred to as Muiratinga. The tree reaches heights close to 40m and is from 75-110cm in diameter. Though the tree is slightly smaller than many species its common thicknesses are wider. In addition to that, about the first 70% of the tree is straight and clear of any branches meaning that it is a good tree for lumber usage. The color of Bloodwood ranges from a pale red to a deep and lustrous red. The wood is named after the sap that forms around the cut before the wood is dried and resembles blood. There are some pieces that have high figurations but overall the grain is straight composed of some dark autumnal streaks. It machines well even though it is dense. One thing of note is that the wood has a high silica content which can dull cutters quickly. It glues well. Bloodwood looks great when it is used against other duller woods and is a great accent piece. It keeps its red colors better than many other woods so when used as flooring, it is desirable. We carry in both S4S and E4E and can mill custom profiles upon request. It’s uses include, flooring, jointery, millwork, furniture and turning.

Common Name:

Bloodwood, Satine, Conduru, Satinwood, Muriatinga

Botanical Name:

Brosimum rubescens

Indigenous to:

Tropical Central America, extending down through the South American Tropics

Modulus of Rupture:

25,290 lbf/in2 (174.4 MPa)

Shrinkage:

Tangential – 7.0% Radial – 4.6% Volumetric – 11.7% T/R Ratio – 1.5

How is it dried:

Kiln Dried (KD)

Is it dried quickly:

No, it is slow to season when done correctly

Stability:

Muiratinga remains stable after the drying.

Exterior Wood Recommendation:

No its durability is not of the highest quality and we only recommend the highest durability for outside use.

Fastening Method:

Should be predrilled for screws

Ecosystem impact:

This tree is not threatened by any over-logging and is not listed on any CITES Appendices to be regulated for over logging.

Toxicity and allergic reactions:

Rare to none the dust has been reported as occasionally causing effects such as thirst and salivation, as well as nausea. Can also cause skin irritation.

Odor:

Has a light scent when being worked.

Product we manufacture using this species:

Info coming soon

Other common uses:

Cabinetwork (high class furniture)Sliced veneer

Turned goods Stairs (inside)

Interior panelling Flooring

Stringed instruments (bow)

Sculpture

Heavy carpentry

Wood-ware

Tool handles (resilient woods)

Note: Wood recommended for high class end-uses.

Susceptibility to

Dry Wood borers:

Durable – sapwood demarcated (risk limited to sapwood)

Fungi:

Class 2 – durable

Termites:

Class D – durable

Treatability:

Class 4 – not permeable

Janka Hardness:

  • 2,900 lbf (12,900 N)

Quaruba hardwood lumber products

Quaruba hardwood lumber products

Quaruba –(Vochysia spp (maxima)(melinoni))

This tree grows tall and wide, regularly reaching heights between 25-45m and sometimes as tall as 60m. 180cm wide boles are uncommon but possible with the average being 90-100cm. Periodically this tree exhibits large gum deposits inside of the heartwood which show as a bright red spot inside of the pinkish-orange sapwood. It’s relatively soft (as compared to many other South American hardwoods) and easy to work with both machine and hand tools. Quaruba is straight grained and has a very different color to it. It is a pinkish orange to brown in color, with a lot of consistency in color of one log. The useable lumber yield is high and it dries well if done correctly. It is a slower kiln dried wood to lower the risk of checking and cracking. When done correctly it will be a stable wood that will last years in doors or under cover. It does accept a finish well and glues properly. Even though it is rated as moderately durable we do not recommend using it as an exterior wood. Mostly because of it’s tendency to check if left out to the elements. It does however perform very well inside for cladding, table tops, flooring or any other element where a wood is that isn’t well known and provides a very unique look and color. If you want it S4S (smooth 4 sides) E4E (eased 4 edges) or rough sawn we can provide that. As well as slabs all of it is KD and available in our normal profiles or in a custom profile if you supply us with the specs.

Common Name :

Brazilian Mahogany, Quaruba Rosa, Quaruba Cedro

Botanical Name :

Vochysia spp (maxima) (melinoni)

Indigenous to :

Northern South America from Brazil, east to Equador

Modulus of Rupture :

11,300 lbf/in2

Shrinkage :

Tangential: 9.8% Radial: 3.7% Volumetric: .52% T/R Ratio: 2.6

How is it dried :

Kiln Dried (KD)

Is it dried quickly :

No, if dried too fast than risk of checking, cracking, and cellular collapse.

Stability :

Quaruba remains stable after the drying process but should not be left in the elements without some cover

Exterior Wood Recommendation :

class 2 – inside or under cover (dampness possible) Should not be left outside due to the fact of it being slightly softer than our regular outdoor woods it will absorb and expel moisture at quicker rates. This means that it has a chance to warp and/or check.

Fastening Method :

Should be predrilled for screws

Ecosystem impact :

This tree is not threatened by any over-logging and is not listed on any CITES Appendices to be regulated for over logging.

Toxicity and allergic reactions :

Rare to none

Odor :

No distinct smell

Product we manufacture using this species:

Coming Soon

Other common uses:

Veneer for interior of plywoodVeneer for back or face of plywood

Interior joinery

Boxes and crates

Formwork

Interior panelling

Blockboard Fiber or particle boards

Furniture or furniture components

Moulding

Turned goods Glued laminated

Susceptibility to

Dry Wood borers:

Susceptible – sapwood not or slightly demarcated (risk in all the wood)

Fungi:

Class 4 – poorly durable

Termites:

Class S – susceptible

Treatability:

Class 3 – poorly permeable

Janka Hardness:

  • Data Coming Soon

Installing Deck Tiles

Deck Tile Installation

Can completely change the look of a garden. They can make a concrete patio seem far more inviting, or they can open up a space of bare ground. The beauty of deck tiles is their ease of use. Depending on the area to be covered, you might not need any tools at all. Even where tools are necessary, they are basic items you probably already own.

Step 1 – Calculate how much material you will need

Calculate how many deck tiles you’ll need for your project. Most deck tiles are 12 inches by 12 inches, or 1 square foot. All you need to do is calculate the square footage of the area (length multiplied by width) to know how many tiles you’ll need. You can mix and match designs, if you wish, to create interesting effects. Look at what’s available and make your decisions carefully. You may use the tiles on any flat surface. However, if you’re using them on bare earth, you should install a weed barrier first and ensure the ground is completely level. When installing over concrete, sweep the area clean first. If there are small cracks of less than 3/8 inch, you can lay the tiles directly on top as long as the sides of the crack are even. If the surfaces are uneven, you’ll need to repair them first.

Step 2 – Install the Tiles

To install the deck tiles, start from one corner and work outwards. Each tile will lock together. A small gap is left between the assembled tiles which facilitates drainage. The gap also helps if the tiles expand or contract due to the heat or cold. If you’re making a design involving several different designs of deck tile, make a grid plan first and follow it as a guide. Keep clipping the tiles together until you have covered the entire area. You don’t need to fix the deck tiles to the surface beneath.

Step 3 – Cut the Deck Tiles

If you need to cut the deck tiles to fit around an obstruction, use a jigsaw. Mark out the area to size, cut it off and use sandpaper to smooth the rough edges. You can now lay the tile as you would normally.

Step 4 – Hide Tabs on Outside Deck Tiles

The tiles at the edge of the area will display the plastic tabs used for interlocking. To hide these, you can buy reducer pieces that match the tiles. These lock into place and form a pleasant edge to the area. You can also buy corner reducing pieces.

Step 5 – Protect the Tiles

To protect the tiles after installation, use a coat of decking oil on the wood. Renew this every 12 months (or more often if the tiles are exposed to extreme weather). With deck tiles, you can use your new deck area as soon as you’ve finished the installation.

Advantage Florestal Hardwood Deck Tiles

Real Wood Deck Tiles are inexpensive and easy-to-install. But those are not the only reasons why you want to buy them. Customers who remodel their old patio, balcony, or roof with Advantage Deck Tiles do so because they want a genuinely beautiful outdoor living space that lasts. While settling for painting over their existing surface is always an option, they want something better, more natural. Advantage Deck Tiles give you, An attractive, dynamic looking surface An easy-to-install deck that takes hours, not days All the durability & resilience of long-length hardwood decking A solid solution to renovating concrete decks & patios Years of hassle-free use without any required maintenance Built using all stainless steel hardware Many of our customers prefer to install Advantage Deck Tiles over cracked concrete patios. As you can see from the gallery below, doing so will give you an eyesore you no longer have to live with!Why Advantage Deck Tiles™ are Perfect for DIY Projects. Our Deck Tiles are available in a variety of species and as both FSC certified and non-FSC certified. Our deck tiles are also available for wholesale container export to most major ports worldwide (minimum quantity applies).

More Product Information

Angelim – Vermelho – Hardwood Lumber Products

Angelim - Vermehlo - Hardwood lumber products

Angelim – Vermelho –(Dinizia Excelsa)

Some common names include Gurupa, Faveira Preta, Brazilian Apitong, Angelim Ferro. This wood is common in the industrial flooring for trailers and shipping containers. The popularity of this species has grown a lot as a substitute for Apitong. Angelim Vermelho has a very distinct unpleasant smell as soon as it’s cut or re-wetted. It is moderately stable but prone to cellular collapse. Drying the wood in the correct way prevents the collapse from happening. This is a good wood for exterior framing because of rot resistance and strength. Available as FSC certified and kiln-dried (KD). We have Angelim Vermelho available in decking, flooring, dimensional lumber, E4E, S4S, RS (Rough Sawn), deck tiles, and table slabs.

Common Name:

Gurupa, Angelim Falso, Angelim Ferro, Angelim Vermehlo, Faveira grande, Faveira Preta

Botanical Name:

Dinizia excelsa

Indigenous to:

Brazil and Guyana in South America

Modulus of Rupture:

 22,550 lbf/in2 (156 MPa)

Shrinkage:

Radial: 5.1%, Tangential: 8.5%, Volumetric: .68%, T/R Ratio: 1.7

How is it dried:

Info coming soon

Is it dried quickly:

Normal to slow

Stability:

Poor to moderate stability

Exterior Wood Recommendation:

Class 4 – in ground or fresh water contact Use class ensured by natural durability:
Species covering the use class 5: This species also covers the use class 5 (end-uses in marine environment or in brackish water) due to its high specific gravity and its hardness.

Fastening Method:

Nailing / screwing:  good but pre-drilling is necessary
Gluing: Yes (for interior only)
Note: Gluing must be done with care (very dense wood).

Ecosystem impact:

This wood species is not listed in the CITES Appendices or on the IUCN Red List of Threatened Species. It has no commercial restrictions.

Toxicity and allergic reactions:

Severe reactions are quite uncommon, however Angelim vermelho has been reported to cause a allergic reaction.

Odor:

 Has a fairly strong and unpleasant odor when being worked.

Product we manufacture using this species:

Deck Tiles

Other common uses:

Sleepers Bridges (parts in contact with water or ground)

Heavy carpentry Vehicle or container flooring

Industrial or heavy flooring Bridges (parts not in contact with water or ground)

Ship building (planking and deck)

Stairs (inside)

Poles

Susceptibility to

Dry Wood borers:

durable – sapwood demarcated (risk limited to sapwood)

Fungi:

class 1 – very durable

Termites:

class D – durable

Treatability:

class 4 – not permeable

Janka Hardness:

  • 3,160 lbf (14,050 N)

Garapa – Hardwood lumber products

Garapa - Hardwood lumber products

Garapa – (Apuleia Leiocarpa)

Other common names include Brazilian Oak, Brazilian Ash, Cobre, and Garrote. The wood is medium density for a tropical hardwood and mills nicely. Using sharp cutters is important as It does have a dulling effect on cutter heads. Our factory sharpens tooling on site in order to provide excellent quality when milling such woods. Garapa is golden yellow in appearance and is available from our facilities as both FSC and Non-FSC certifications. Our Garapa is kiln-dried (KD) readily available as decking, flooring, dimensional lumber, E4E, S4S, RS (Rough Sawn), deck tiles, and table slabs.

Common Name:

Info coming soon

Botanical Name:

Apuleia Leiocarpa

Indigenous to:

The variety “molaris” is found in the Amazonian forest, mainly in flooded areas. The main species, Apuleia leiocarpa is found mainly in the South of Brazil, in the Atlantic coast forests, easily colonizing cleared areas.

Modulus of Rupture:

18,530 lbf/in2 (127.8 MPa)

Shrinkage:

Radial: 4.2%, Tangential: 7.5%, Volumetric: 11.4%, T/R Ratio: 1.8

How is it dried:

kiln-dried (KD)

Is it dried quickly:

No should be dried slowly

Stability:

Moderately Stable to Stable

Exterior Wood Recommendation:

Use class ensured by natural durability: class 2 – inside or under cover (dampness possible)

Species covering the use class 5: Yes

Against dry wood borer attacks:does not require any preservative treatment

In case of risk of temporary humidification: requires appropriate preservative treatment

In case of risk of permanent humidification: use not recommendedThe natural durability of Grapia is very variable. In some cases, this variability can be observed inside the same piece of wood. This species cannot be used without appropriate preservative treatment for end-uses under use class 3 except for some parts of a work such as windows, less exposed than
others (entrance doors, shutters).
This species naturally covers the use class 5 (end-uses in marine environment or in brackish water)
due to its high silica content. However, it is not recommended to use it in case of strong structural
constraints due to its medium mechanical properties; it is most suitable for end-uses like shipbuilding.

Fastening Method:

Nailing / screwing: good but pre-drilling is necessary
Gluing: Yes

Ecosystem impact:

This wood species is not listed in the CITES Appendices or on the IUCN Red List of Threatened Species.

Toxicity and allergic reactions:

Although severe reactions are uncommon, Garapa has been reported to occasionally cause skin irritation.

Odor:

Nothing discernable

Products we manufacture using this species:

decking, flooring, dimensional lumber, E4E, S4S, RS (Rough Sawn), deck tiles, and table slabs

Other common uses:

  • Exterior joinery
  • Light carpentry
  • Heavy carpentry
  • Hydraulic works (seawater)
  • Ship building (ribs)
  • Cooperage
  • Turned goods
  • Furniture or furniture components
  • Wood frame house
  • Flooring
  • Industrial or heavy flooring
  • Interior joinery
  • Ship building
  • Stairs (inside)
  • Vehicle or container flooring
  • Cabinetwork (high class furniture)
  • Tool handles (resilient woods)
  • Formwork
  • Boxes and crates Wood-ware
  • Note: Finishing is easy but filling is recommended.

Susceptibility to

Dry Wood borers:

Durable – sapwood demarcated (risk limited to sapwood)

Fungi:

Class 3 – moderately durable

Termites:

Class M – moderately durable

Treatability:

Class 3 – poorly permeable

Janka Hardness:

  • 1700 lbf (20,040 N)